Designing and building a system that holds two solar panels and directs them to be perpendicular to the sunlight all the time in order to produce maximum energy, in addition directing the solar panels to be perpendicular to the sunlight allows knowing the position of the sun.
Project tag: iot
-
-
The efficient and simple software presented in this project delivers accurate navigation on any given proper route using the GPS, compass, and accelerometer data. The software can also detect an accident using an accelerometer and send out an SOS message including the rider’s location to a chosen emergency contact. Moreover, the application for android OS supports Bluetooth communication between the ESP32 and the rider’s phone to upload the route to...
-
The project is designing and implementing a navigation device for helping off-road motorcycle riders, which can call for SOS in emergency case.Categories: IOT
-
This project implement IOT system that will connect the user car to the home network for anti theft solution. The system will notify, update and send real-time data collected by the system representing the current state. The system implemented using LoRa as physical transfer layer and HTML based server as the user interface.
-
Pet tracking device which incorporates GPS for tracking location connect to an internal WIFI server and upload HTML page
-
Glaucoma is a group of eye diseases that generally involves damage to the optic nerve and loss of vision due to damage to the visual field. This condition can result from high intraocular pressure or even arise when the intraocular pressure is within normal limits. This project implemented a Glaucoma indicator device prototype using two sensors (force and pressure) to predict the intraocular pressure.
-
Monitoring of air pollution (CO2) and number of people at each station of the Carmelite is required, Modern technologies make it possible to create small and cheap sensors, which can give the indications.
-
The aim of the project is to design and produce a compact, low-power sensors array that will be able to sense the air quality and the Heartbeat of the test subject. The collected information is to be transmitted to a server via long range communication protocol for further research and analysis.Categories: Embedded Systems
-
Car Emissions and Global Warming have direct relation, thus the personal vehicles are a major cause of global warming. Collectively, cars and trucks account for nearly 15% of the total emissions, emitting around 24 pounds of carbon dioxide and other global-warming gases for every gallon of gas, so with the help of the IOT technology , building an tiny, inexpensive sensor could help study the issue by counting the number...
-
Carmelit, which is an underground funicular railway in Haifa, raised a need for a device that can monitor Indoor air quality (by CO_2 level) and the number of people at stations. The project goal is an implementation of an IOT device which is small, portable, inexpensive and meets the Carmelit requirements.Categories: IOT
-
The issue of the driving safe has been more and more attended in the government and car industry. One of the major driving safe techniques is the vehicle diagnostic system development. In Addition, SMART City is an important economic strategic planner for the economic transformation and upgrading of the country. Many countries have been at the forefront of technology Progress and start smart city development programs. Due to the two...
-
Despite the technological development of transmitting mails, conventional mail is still needed. People occasionally forget to check their mailbox, thus they miss receiving important envelops which are still sent to mailbox, such as the ones containing official documents and bills. The goal of the present project is building a low power device that notifies its owner regarding incoming mail packages, and counts them.Categories: IOT
-
The aim of the project is to Design and produce a low-power autonomous sensor that will be able to sense the temperature and humidity. The collected information is transmitted to the application server, which introduces it in a browser user interface.
-
A small energy-efficient camera sensor that has the ablility to transmit an image to the cloud was built. The sensor communicates with the cloud through LoRa (LoRa stands for Long Range, a low-power wide-area network technology) and thus is able to be located at a distance greater than any other communication network. The captured picture is divided to packets, and these are transmitted with the help of a special communication...Categories: IOT
-
The project “wisdom of the crowd” was about finding a solution to stealing/loss of individuals in a herd. The solution is based on exclusively manufactured IoT board and an Ad-Hoc wireless network deployment algorithm developed and implemented for it. The IoT board was based on Lora communication, supports up to 15Km range in open environment, while using minimal energy. The algorithm developed to reduce as much as possible the network...Categories: IOT
-
Air pollution is one of the most difficult problems in the modern world so there is a need to measure the air quality , as well as tempreture and humidity since they affect air pollution, via low power sensors and transmit the data to the cloud .Categories: IOT
-
The project is developing an IOT system in order to connect a Parkinson medical device to the amazon cloud and uploading a data from the device controller to the server. In addition, to implement a convenient GUI with follow up system.Categories: IOT
-
IoT parking system that manages a parking lot and provides services to hardware components as leds, sensors and controllers, and users as admin and clients.
-
Analysis of the eyelid movement enables doctors to diagnose several types of neurological and ophthalmic diseases. The project's goal is to connect the device to the AWS cloud services and create an easy to use web page that connects to the AWS cloud, and control the device from the web page.
-
This project is a part of a chain of projects aimed to build a control system for the EE faculty parking lot. The system includes digital displays with counters, LED indicators hanging over parking spaces and a management system to control them using different IoT devices and sensors. The objective of this work is to create the management program to control the parking lot from afar. This work will go...
-
Anemometers (wind speed meters) are an important measurement tool that have several applications in a variety of fields. They have moving parts that cause erosion and increase the physical size of the component. The project’s main goal is to make a cluster of IOT-sensors (without moving parts) that will replace the traditional anemometers. In addition the cluster will show both the wind speed and wind direction in the location that...Categories: IOT
-
Voice Activated Technology - Identification and analysis of background noise. Differentiating between different sounds and giving proper indication.
-
The goal of the Project is Development an IOT sensor system management. The transfer of information done using the MQTT protocol. The system implement an example application that demonstrate the capabilities of the management system. The system allows the user to control the system manually (from the GUI) or automatically (according to the smart server)Categories: IOT
-
In recent years the air pollution from vehicles is increasing in a rapid rate. The aim of this project is to develop a low cost system that when combined with an oxygen sensor will help to reduce air pollution from vehicles.
-
The 'Internet of Things' is a network of many devices, embedded with electronics, software and sensors. The connectivity between these objects enables collecting and exchanging data. Following this idea, utilizing strain gauge, ESP8266 microprocessor and Amazon Web Services we implemented a system, which conducts 'Structural Health Monitoring' a method for damage detection of engineering structures.
-
Analysis of the eyelid movement enables doctors to diagnose several types of neurological and ophthalmic diseases. The project's goal is to assemble a system that accurately collects information on the eyelid's movement for few minutes and in the end, move the measured data through Wi-Fi to a user's computer.
-
In many cases opening doors manually has become an inconvenience. The main goals of this project are to design a small and affordable system which connects to home network, takes a picture of the person at the door and send it to user, and also enable remote control on door's lock.
-
Weather Station remotely managed by Amazon AWS IOT services.
-
This project is about gathering temperature information on real time using IoT Technology. The system is capable of monitoring the current temperature in one or more rooms, detect tendencies and warn about them by e-mail or indicating light.
-
The IoT ("Internet of Things") is a big trend in the industry nowadays, and one of the most commonly used products in IoT networks is a remote-controlled web camera. The purpose of this project was to build such a system, using two Zedboards (SoPC), a joystick, a screen, a motor controller and a stepper motor.
-
This project took a specially designed board and implemented on it a Kalman-Filter based algorithm for merging GPS and INS positioning data and outputting a highly accurate and frequently updated position solution. The report gives some background theory needed for understanding, show the proposed algorithm and implementation and gives a brief results review.
-
A sensitive area requires security footage coverage for the next 24 hours. This project’s main goals to design a device which allows the detection of movements taking place inside a covered area, a couple of meters ahead of the device, and notify the user of the above activity by sending captured images over Wi-Fi network.
-
The project goal is to add Wi-Fi communications capabilities for Zed-Board. The communication will be performed by GUI on remote computer to read, write, and send information from or to the board.
-
Recently, more and more devices are being connected to each other in a smart way, as known as “IoT”. Therefore, we brought out a system of a “Smart Lock” instead of the traditional Lock, as a part of the growth of IoT. This Lock can be used by anyone who has Android based devices , and with the app installed on it, so he/she can control the Lock by his...
-
Full smart house system composed of IoT modules. The system built using ESP8266 components and sensors and includes server environment for administrating and controlling those modules. The server environment contains MQTT communication server, mongoDB server for maintaining the Database and express.js to navigate between those servers.
-
Solution based on IOT utilization to prevent sheep from steal or any distress situation. Every sheep would be equipped with a connected collar that will be able to inform the Shepherd on its situation. A sophisticated algorithm would be able to detect any dangerous case by using sensors, GPS and other data, and alert the shepherd by a SOS message.
-
The problem of relaying battlefield information is at the heart of all modern warfare, getting crucial, reliable data from one area to another, or from the battlefield back to the chain of command as fast as possible. To help mitigate the problem, we developed a small, lightweight, gun mountable sensor array with wireless capabilities and sufficient battery life to record and transmit vital information off the battlefield.
-
Herd Monitoring System is defined for tracking and control animal location in Real-Time in their natural or artificial environment. System allows up to 15 km range monitoring with significant energy consumption savings based on low power modules, algorithms and Solar Panel power supply.
-
The goal of this project is to develop a smart traffic lights system that could sense real time changes in volume and speed of traffic. Using BT and WiFi signals, the system extracts statistical information on the road. According to that, a policy of traffic light would be determined, in order to receive a wardrop (equilibrium).
-
The project 'IOT for a Car' belongs to the IOT area. This project deals with developing an alert System, located in a car, which sends reports to the car owner in cases of emergency.
-
System based on Arduino Mega micro-controller that can help one to manage his or her refrigerator in an easy manner.