Projects Archive

  • Year - 2017
  • PCB top1

    A sensitive area requires security footage coverage for the next 24 hours. This project’s main goals to design a device which allows the detection of movements taking place inside a covered area, a couple of meters ahead of the device, and notify the user of the above activity by sending captured images over Wi-Fi network.

    Tags: | |
  • Small Image

    This project took a specially designed board and implemented on it a Kalman-Filter based algorithm for merging GPS and INS positioning data and outputting a highly accurate and frequently updated position solution. The report gives some background theory needed for understanding, show the proposed algorithm and implementation and gives a brief results review.

    Tags: | | |
  • image3

    The IoT ("Internet of Things") is a big trend in the industry nowadays, and one of the most commonly used products in IoT networks is a remote-controlled web camera. The purpose of this project was to build such a system, using two Zedboards (SoPC), a joystick, a screen, a motor controller and a stepper motor.

    Categories: |
    Tags: | | |
  • Year - 2016
  • small_pic

    This project aim was to create an infrastructure who enable the end user to create and use hardware accelerators library using INtime for Windows RTOS and NetFPGA-SUME.
    Hardware accelerators are created with Xilinx Partial Reconfiguration technology that gives us the ability the ability to swap accelerators at real-time without affecting other operational part of the system.

  • featured-image

    In this project we implemented a waveform generator on a FPGA that gets the commands from a connection to a PC. It is then transferred to a simple DAC and an analog waveform is created. The user sends his choice to the system – the wave shape and all the other parameters.

  • small

    The aim of this project is to explore system-induced distortion mechanisms and analyze their effects on binary and CW signals integrity.
    Modern high-speed digital systems require data rates in excess of 1GHz
    These rates, and the resulting system bandwidths, pose severe design challenges aimed to minimize the system-induced distortions that affect negatively the binary signal integrity and the ability of the decoding sytem to recover the digital data correctly. The effect on the BER of the system is thus destructive.

  • block

    Developing an electronic door eyepiece as part of the IOT revolution.
    Delivering a real time photo of your home, reachable from any device.
    Motivated by comfort and home security low cost components now enable us to integrate technology in quotidian life.

  • picture1

    The project 'IOT for a Car' belongs to the IOT area.
    This project deals with developing an alert System, located in a car, which sends reports to the car owner in cases of emergency.

    Tags: | | | |
  • small

    The goal of this project is to develop a smart traffic lights system that could sense real time changes in volume and speed of traffic. Using BT and WiFi signals, the system extracts statistical information on the road. According to that, a policy of traffic light would be determined, in order to receive a wardrop (equilibrium).

    Tags: | |
  • project_image2

    The aim of the project is to design the 5GSPS sample rate scope using a new and more cost effective technology of the DRS4 unit. A full electronic circuit scheme of the scope and a PCB design had been designed as a base for the future possible manufacture process.

  • image1

    Herd Monitoring System is defined for tracking and control animal location in Real-Time in their natural or artificial environment. System allows up to 15 km range monitoring with significant energy consumption savings based on low power modules, algorithms and Solar Panel power supply.

    Tags: | | |
  • idle

    Learning to play the guitar can be a frustrating experience for first time.The aim of the project is to simplify the learning process even further by creating a smart guitar that has built in LED light and sampling mechanism that show you how to play the song you want.

  • featured-image

    The problem of relaying battlefield information is at the heart of all modern warfare, getting crucial, reliable data from one area to another, or from the battlefield back to the chain of command as fast as possible. To help mitigate the problem, we developed a small, lightweight, gun mountable sensor array with wireless capabilities and sufficient battery life to record and transmit vital information off the battlefield.

    Tags: | | | |
  • Proj_pict2

    Solution based on IOT utilization to prevent sheep from steal or any distress situation.
    Every sheep would be equipped with a connected collar that will be able to inform the Shepherd on its situation.
    A sophisticated algorithm would be able to detect any dangerous case by using sensors, GPS and other data, and alert the shepherd by a SOS message.

    Tags: | |
  • hardware

    The project objective is to implement of a low cost controller for a 3D-printer.
    The printing process of a 3D-object is quite complicated and involves many phases:
    first, creation of a 3D-object Sketch and printing-commands file using a CAD & CAM programs.
    Next, sending the above commands-file to the controller, the focus of this project,
    which translates these printing-commands to electrical signal.
    These signals will eventually activate the printer according to plan.

  • Hardware-schem

    Recently, more and more devices are being connected to each other in a smart way, as known as “IoT”. Therefore, we brought out a system of a “Smart Lock” instead of the traditional Lock, as a part of the growth of IoT.
    This Lock can be used by anyone who has Android based devices , and with the app installed on it, so he/she can control the Lock by his device.

    Tags: | | |
1 2 3 10